= Transcend M.2 SSD 400S =
 * FreeBSD 13-CURRENT

== camcontrol identify の実行結果 ==
{{{
pass0: <TS512GMTS400S P1225CH1> ACS-2 ATA SATA 3.x device
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)

protocol              ATA/ATAPI-9 SATA 3.x
device model          TS512GMTS400S
firmware revision     P1225CH1
serial number         002021B4E50963200045
cylinders             16383
heads                 16
sectors/track         63
sector size           logical 512, physical 512, offset 0
LBA supported         268435455 sectors
LBA48 supported       1000215216 sectors
PIO supported         PIO4
DMA supported         WDMA2 UDMA6
media RPM             non-rotating
Zoned-Device Commands no

Feature                      Support  Enabled   Value           Vendor
read ahead                     yes      yes
write cache                    yes      yes
flush cache                    yes      yes
overlap                        no
Tagged Command Queuing (TCQ)   no       no
Native Command Queuing (NCQ)   yes              32 tags
NCQ Queue Management           no
NCQ Streaming                  no
Receive & Send FPDMA Queued    no
SMART                          yes      yes
microcode download             yes      yes
security                       yes      no
power management               yes      yes
advanced power management      no       no
automatic acoustic management  yes      no      0/0x00  0/0x00
media status notification      no       no
power-up in Standby            no       no
write-read-verify              no       no
unload                         no       no
general purpose logging        yes      yes
free-fall                      no       no
Data Set Management (DSM/TRIM) yes
DSM - max 512byte blocks       yes              8
DSM - deterministic read       yes              zeroed
Host Protected Area (HPA)      yes      no      1000215216/1000215216
HPA - Security                 no
}}}

== camcontrol security の実行結果 ==
{{{
pass0: <TS512GMTS400S P1225CH1> ACS-2 ATA SATA 3.x device
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)

Security Option           Value
supported                 yes
enabled                   no
drive locked              no
security config frozen    yes
count expired             no
security level            high
enhanced erase supported  yes
erase time                4 min
enhanced erase time       4 min
master password rev       ffff (unsupported)
}}}

== camcontrol hpa の実行結果 ==
{{{
pass0: <TS512GMTS400S P1225CH1> ACS-2 ATA SATA 3.x device
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)

Feature                      Support  Enabled   Value
Host Protected Area (HPA)      yes      no      1000215216/1000215216
HPA - Security                 no
}}}